For Job Seekers and important links

Dr. Enamul Basher

Mobile: +88-01727442468
Phone: PABX:+8802-58157091-4
Fax:      :+8802-58157097
E-mail: enamul.basher@uap-bd.edu

 

Degree      : PhD in Electrical and Electronic Engineering (EEE).
University : Erstwhile Leningrad Polytechnic Institute (Now Saint Petersburg Polytechnical University), Russia.   

Degree : M.Sc.(Honors) in EEE.

University : Erstwhile Leningrad Polytechnic Institute (Now Saint Petersburg Polytechnical University), Russia.

  1. Head of department : Department of EEE, Bangladesh University of Engineering and Technology (BUET), Dhaka.
  2. Dean of the Faculty : Dean, Faculty of EEE BUET, Dhaka.
  3. Professor : Department of EEE, BUET, Dhaka
    Period: 1995 to 2018.
  4. Associate Professor : Department of EEE, BUET, Dhaka
    Period: 1987 to 1995.
  5. Assistant Professor : Department of EEE, BUET, Dhaka
    Period: 1983 to 1987.

Professor : Department of EEE
University of Asia Pacific, Dhaka.
Period: April 21, 2019 – To Date 

Under-graduate :

Courses on Electrical Machines, Energy Conversion, Power Electronics, Electric Drives, Control system Engineering, Renewable Energy, Power System, Power System Protection, Power Plant Engineering.

 

Post-graduate : Advanced Machine Design, Advanced Power System protection, Smart Energy Systems, Advanced control System Engineering, Advanced Renewable Energy systems, Advanced Power Electronics Systems.

More than 10 Post-Graduate and many Under-Graduate Theses works have been conducted.

(a) Field Experience          : Supervision of and Consultancy on Electrical Installations. 

 

(b) Teaching Experience    : Conducted and Conducting Courses on Electrical (Electrical Power

                                             Systems, Electrical Machines and Drives, Renewable Energy,

                                             Power Plants, Power System Protection, Smart Energy system,

                                             Power Electronics and Control Systems) Engineering in Graduate

                                             and Post Graduate Levels.

         

 (c) Teaching job outside BUET : Worked as Visiting Professor in Islamic University of

                                                       Technology (IUT), Dhaka and Chairman of the department

                                                       of EEE, Stamford University, Bangladesh (For two periods).

                                                       Conducted courses on part time basis in different Private

                                                       Universities (Ahsanullah University of Science and

                                                       Technology, Military Institute of Science and Technology,

                                                       University of Asia Pacific, BRAC University, North South

                                                       University) of Bangladesh. Now serving as full time

                                                       Professor of the department of EEE of University of Asia

                                                       Pacific (UAP).

                                                         

   (d) Administrative                      : Served as Head of the Department of EEE and Dean of

                                                         the Faculty of EEE of BUET. Served as Electrical and

                                                         Electrical Power Generation Advisor of BUET and also

                                                         was the member of Academic Council and the Syndicate

                                                         of BUET. Serving as member of recruitment committees

                                                         and tender evaluation committees of BPDB,DPDC,

                                                         EGCB, PGCB, Civil Aviation Authority of Bangladesh

                                                         (CAAB). Serving as external member of Exam

                                                         Committees and Selection Boards of DUET, IUT, CUET,

                                                         MIST and  JUST.  

 

    (e) Consultancy                  : Served in consultancy, testing and troubleshooting jobs

                                                  of Bureau of Research, Testing and Consultation (BRTC) of

                                                  BUET. Now associated with consultancy work of the Patenga

                                                  Container Terminal of Chittagong Port Authority.

Industrial automation, Power system control, SCADA system, Renewable energy, Smart energy, Smart Grid.

Journal publications:

  

  1. E. Basher, G.S. Rogochevskaya and B. V. Sidelnikov, “ Calculations in the armature circuit and analysis of dynamic condition of commutator machines (in Russian),” Commutation in traction purpose and other types of commutator machines, Journal of railways and transport, Omnsk, USSR, December, 1981, pp. 38-44.
  2. E. Basher, G.S. Rogochevskaya and B. V. Sidelnikov, “Magnetic field in quadrature axis of dc machines (in Russian)”. Electromechanics, No. 10, 1983, Novocherkassk, USSR, pp. 29-34.
  3. E. Basher and A.R. Khan, “Nonstationary magnetic field distribution in yoke of dc machines and its particularities”, Electric Machines and Power Systems, USA,

Vol. 10, No. 5-6, 1985, pp. 421-430.

  1. E. Basher and A.R. Khan, “Mathematical modelling of eddy current in commutator  machines”, Journal of the Institution of Engineers, Bangladesh, Vol. 13, No. 2-3,

April-July, 1985, pp. 33-40.

  1.  E. Basher and A.R. Khan, “Normalized parameters for the generalized study of synchronous reluctance motors”, Electrical and Electronic Engineering Research 

Bulletin, Bangladesh Univrsity of Engineering and Technology, Vol. 3, No. 1, 1985,

pp. 36-39.

  1. E. Basher and S.F. Rahman, “Magnetic saturation and calculation of flux in electrical machines”, Electrical and Electronic Engineering Research Bulletin, Bangladesh University of Engineering and Technology, Vol. 3, No. 1, 1985,

pp. 47-53.

  1. A.R. Khan and E. Basher, “Asymmetric operation of saturated synchronous reluctance motors, “ Journal of the Institution of Engineers, Bangladesh, Vol. 15

No.3, July 1986, pp. 19-21.

  1. E. Basher and B.C. Gosh, “Computer aided design of non-segmented synchronous reluctance motor (SRM), “Journal of the Institution of Engineers, Bangladesh,

Vol. 15, No.3, July, 1987, pp. 27-33.

  1. E. Basher, T.A. Chowdhury and M.R. Amin, “Analysis of rectifier controlled separately

               excited dc motor performance”, Journal of the Institution of Engineers,

Bangladesh, Vol. 17, No.2, April, 1989, pp. 35-39.

  1. E. Basher, T.A. Chowdhury and P. Kr. S. Khan, “Computer aided analysis of alternator dynamics during transient conditions, “ Electric Machines and Power

Systems, USA, Vol. 22, No.2, March-April, 1994, pp. 201-214.

  1. Mohammad Shariful Islam, Asif Islam, Enamul Basher, “A self sufficient energy model for poultry farms in Bangladesh to reduce greenhouse gas emission and increase efficiency”. International Journal of Renewable and Sustainable Energy,

Science publishing group, Vol. 2, No. 4, pp 153-162, published in August 10, 2013.

  1. Mohammad Shariful Islam, Asif Islam, Dependra Shaha, Enamul Basher, “ Impact of different factors on biogas productionin poultry dropping based biogas plants of

Bangladesh”. Vol. 2, No. 4, 2013, pp. 25-32, Published in August 30, 2013.

  1. Shuvankar Podder, Raihan Sayeed Khan, Shah Md. Ashraful Alam Mohon, Enamul Basher,” The technical and economic study of solar wind hybrid energy system in coastal area of chittagong, Bangladesh”. Journal of renewable energy, Volume 2015,

14 June, 2015.

       

        14. Enamul Basher, Kazi Ebadat Karim, Md.Mujahidul Anwar, Juline Md. Shoeb,

              “Open loop software control of DC motor by using four quadrant chopper”,

              Journal of the Computer Society of Bangladesh, 2004.

         15. Dr. Enamul Basher, Md. Moshiur Rahman Tarafder, Atiqul Islam, Khaleda

               Parveen,“Optimizing electromagnetic compatibility in switchmode power

               supplies”, Stamford Journal of Electrical, Electronic and Communication

               Technology, ISSN No. 1995-5383, Vol-I, Issue-III, June-2010, pp. 1-13.

         16. Dr. Enamul Basher, Kazi Mostaq Ahmed, B.K.M. Mizanur Rahman, A.S.M.

               Mohsin, Tanbir Ibne Anwar, Md. Mahbubul Alam Chowdhury, “Wireless power:

               Stipulation and its impact on power system”, Stamford Journal of Electrical,

               Electronic and Communication Technology, ISSN No. 1995-5383, Vol-I,

               Issue-III, June-2010, pp. 181-189.

          

        Conference Publications:

 

       1. E.Basher And A.R. Khan, “Modelling of DC machines, working in rapid transients”,

           Proceedings of Beijing International Conference on Electric Machines, Beijing, China,

           August 10-14, 1987, Book-1, pp. 177-180.

       2. A.R. Khan and E. Basher, “Mathematical modelling of single phase condenser

           synchronous reluctance motor (SRM) with special attention to the effects of

           saturation”, Proceedings of Beijing International Conference on Electric Machines,

           Beijing, China, August 10-14, 1987, Book-1, pp. 225-228.

       3. E. Basher, M.Rahman and M.A. Rahman, “Analysis of chopper controlled DC series

           motor”. Presented in the 1989 IEE Industry Applications (IAS) Conference, the 24th

           annual meeting, Sandiego, USA, on October 1-5, 1989. Published in Conference

           Proceedings, pp. 189-194.

       4. B.C. Gosh and E. Basher, “Transient analysis of synchronous reluctance motor (SRM)

           using improved mathematical model”. Presented in the 13th national system conference

           in the Indian Institute of Technology, Kharagpur, India, December 13-15, 1989. The

           paper has been published in the Conference Proceedings, pp. 138-141.

       5. Enamul Basher and T.A. Chowdhury, “Government assurances for private power

           development in Bangladesh”. Presented in the first IEEE National Conference on

           Electro Technology ET’95, organized jointly by IEEE and BUET on October 20,

           1995. Published in the Conference Proceedings, pp. 9-15.

       6. Enamul Basher, Mohammed Mainul Hoque and Abu Mohammad Tushar Iqbal

           Rahman, “Dynamic response of an alternator during unsymmetrical fault at its

           terminals”, Presented and published in the Proceedings of the 3rd International

           Conference on Electrical and

           Computer Engineering (ICECE 2004), held in December 28-30, 2004, organized

           jointly by BUET and IEEE. PP. 31-34.

      7.  Enamul Basher, Amina Hasan Abedin, Mahbubul Hoq and Md. Abu Sayid Haque,

           “Minimization of position error by using microcontroller based micro step

            technology”. Presented in the 7th International Conference on Computer and

            Information Technology (ICCIT), organized by BRAC university in collaboration

            with reputed private universities. It is published in the Proceedings of the conference,

            pp. 155-160.

       

 

 

 

        8. Enamul Basher, Marzia Hoque Tania and Md. Samiul Alam, “A microcontroller

            Based automatic solar tracking scheme”, Presented and published in the Conference

            Proceedings of the International Conference on Enviorenmental Technology and

            Construction Engineering for sustainable development (ICETCESD-2011), organized

            by Shahjalal University of Science and Technology. PP. 264-265.

       9.  Enamul Basher, Md. Asif Chowdhury, Kazi Taimur Reza and Didar Mohammad

             Alam.“Third harmonic differential over current relay based protection system for

             stator ground fault in synchronous generator”. Presented and published in the

             Conference Proceedings of the 9th International Conference on Electrical and

             Computer Engineering (ICECE 2016), held in December 20-22, 2016, organized

             jointly by BUET and IEEE.

       10. Rajib Baran Roy, Enamul Basher, Rojoba Yasmin, Md. Rokonuzzaman,”Fuzzy logic

             based MPPT approach in a grid connected photovoltaic system”, Presented and

             published in Conference Proceedings of the 8th International Conference on

             software, Knowledge, Information management and Application (SKIMA 2014),

             held on 18-20 Dec. 2014.

        11. Joan D’Rozario, Sabrina Shams, Shahinur Rahman, Ahmed Sharif, Enamul Basher,

              “Cost effective solar-biogas hybrid power generation system”. Presented and

               published in the Conference Proceedings of the 2015 IEEE Conference on Industrial

              Technology (ICIT), held on 17-19 March, 2015 at Seville, Spain.

        12. Shuvankar Podder, Raihan Sayeed Khan, Shah Md. Ashraful Alam Mohon, Md.

              Jubair Hussain, Enamul Basher, “Solar radiation approximation using sunshine hour

              at Patenga, Bangladesh”. Presented and published in the Conference Proceedings of

              the 8th International Conference on Electrical and Computer Engineering (ICECE

              2014), held in December 20-22, 2014, organized jointly by BUET and IEEE.

        13. Nafis Kabir and Dr. Enamul Basher,”Effect of intrinsic nonlinearities on 

              longitudinal flight dynamics”, Presented and publishes in the Proceedings of 3rd

              Annual Paper Meet of Electrical Engineering, organized by Electrical Engineering

              division, The Institution of Engineers, Bangladesh (APMEE 2012), held on 3-5 July.

              2012.

        14. Rajib Baran Roy, Jerome Cros, Enamul Basher, Shahana Akter, “Power

              compensation by DSTATCOM plus SCESS”. Presented and published in the

              Conference Proceedings of the 2017 4th International Conference on advances in

              Electrical Engineering (ICAEE), held on 28-30 Sept. 2017.

        15. Rajib Baran Roy, Jerome Cros, Enamul Basher, Dewan Shariar, Md. Aminul Islam,

              “Precise Power Flow Analysis of MTDC”. Presented and published in the Conference

              Proceedings of the International Conference on Electrical, Communication,

              Electronics, Instrumentation and Computing (ICECEIC), 2019, Tamil Nadu, India.

        16. Rajib Baran Roy, Enamul Basher, Shaiyek Md. Buland Tashim and Md. Altaf

              Hossain, “Hybrid Power System Model for off-grid rural areas of Bangladesh”,

              Presented and published in the Conference Proceedings of the International

              Conference on Electrical, Communication, Electronics, Instrumentation and

              Computing (ICECEIC), 2019, Tamil Nadu, India.

 

 

      Conference Presentation:

 

       1. A.R. Khan and E. Basher, “The use of synchronous reluctance motor in the health

           related field”. Presented in the 10th Annual Bangladesh Science Conference on

           March, 1985.

       2. E. Basher and T.A. Chowdhury, “Superconductor in power generation”, Presented in

           the seminar on Technology for self reliance and development, organized jointly by the

           Asian Institute of Technology, Thailand and Bangladesh University of Engineering

           and Technology, held on Nov. 2-4, 1988 at Dhaka, Bangladesh.

       3.  E. Basher and T.A. Chowdhury, “Superconducting armature winding at power

            frequency for synchronous generators”. Presented at the 14th International Nathiagali

            summer college on physics and contemporary needs, co-sponsored by Pakistan

            Atomic Energy Commission and International Center for Theoretical Physics, Trieste,

            Italy, held on June 8-29, 1989 in Nathiagali, Pakistan.

       4.  E. Basher, “Simulation of transient behavior of low power synchronous motor

            without rotor excitation”. Presented at the IASTED International Conference on

            modelling and simulation, held in Colombo, Sri Lanka on July 26-28, 1995.   

 

 Participated in several International and National Technical Conferences and Seminars

 and also chaired the Conference Sessions.

;